Anatomy Of A Exterior Door Frame
Behind the wall where you cant see them are the king studs the jack studs or trimmers the cripple studs and the header which all form the rough door opening.
Anatomy of a exterior door frame. The frame sometimes called a jamb is made up of three separate pieces and surrounds the door creating a frame in which the door can sit. They are connected via a pin. Small commercial buildings and other similar spaces still use traditional key-and-doorknob locks for both interior and exterior doors.
Frames are made up of composite material solid wood or veneered wood. Heres some door terminology. The door slab can be constructed of wood fiberglass or steel.
One leaf attaches to the door. Cill or threshold This is the bottom portion of an exterior door frame and is used internally when transitioning from one floor covering to another. Traditional locks also known as mechanical locks.
The door sill fits on the front of the door facing outwards to keep any dirt and water coming in underneath the door. Grilles can be located between panes of insulating glass commonly called grilles-between-the-glass or on the outside of the glass. Interlocking tubes on the leafs that fit together so the pin can connect them yet enable a.
Paul Ciccone introduces us to the basic anatomy of an exterior door unit. Exterior doors are essential for security and weather protection purposes. Think about how you normally open doors.
Dont Forget the Intangibles. It gives a border for the door. The locks on exterior doors are sturdier and there are built-in mechanisms to prevent tampering.