Board And Batten Exterior Wall Construction

External wall framing is unlikely to be treated.

Board and batten exterior wall construction. Foam board batten solid concrete block wall moisture I have two solid block 1950s exterior north facing and west facing walls in a bungalow bedroom. Perhaps the most common arrangement uses 1x10 boards and 1x2 or 1x3 batten. The customer wants to use a rough cut Oak board and batten siding.

Dec 6 2015 - Z10 area Design guides from James Hardie that cover Hardie vertical panel and Hardie Batten. Enclosed Deck Balustrade to Wall Junction. Install the cavity battens directly over the wall underlay as described in Cavity battens on page 9.

True board-and-batten is made with vertically installed wide boards and narrow battens fastened over the gaps between the boards. Vertical boards butted side by side to form the exterior covering of a building combined with vertical battens to cover the side butt joints between boards. Metal claddings need a separation layer between the cladding and cavity battens containing copper-based treatment.

So the fasteners drive between the boards and into the wall. We typically frame with 2 x 6 walls 16 oc with 12 osb and r-21 fiberglass insulation. The walls are plastered semi gloss painted in good condition and with no signs of damp.

I am looking for any advice on nailers for the boards that will obviously fall inbetween the 16 oc framing. 6 Installation Specification - Board Batten Cavity Fixed select to download. A batten is generally a strip of timber although it can also be steel or plastic which is used in the construction of buildings.

DO NOT cover with a dark covering or tarp. In addition vinyl board and batten siding resists snow rain and hail. See more ideas about board and batten siding hardie board and batten.