Scraping Lead Paint Exterior

How to scrape paint best using a repetitive arm movement holding paint scraper in your hand placing a blade under paint using leverage prying it away from surface underneath.

Scraping lead paint exterior. When owners scrape off the old paint in preparation for repainting this too can contaminate the soil. Old lead-based paint is of particular concern because of the very common practice of scraping or sanding in preparation for repainting. If a sander is being used attach it to a HEPA vacuum shroud.

Wet scraping is allowed. Use a spray bottle to dampen the surface before you begin scraping. Hold it over an area for 20 to 30 seconds give it a quick scrape and all the paint layers come off down to the bare wood.

Use wet techniques when prepping exterior as well as interior lead paint. Wet lead chips will fall to the ground whereas dry lead chips will blow away. For more information about removing normal paints see out project here.

Its lightning fast said Clark. Hand scrapers wire brushes and other similar tools are used to scrape off the paint by hand. Ad Discover the cost to paint your exterior with a free quote from a Master Painter.

Scraping paint up until you reach paint that is properly grabbing. But part of any good paint job includes removing cracked or peeling paint either by scraping it with a knife sanding it or removing it with a heat gun. Think of the most mild means of scraping or sanding.

Its not necessary to remove all the lead paint just the paint that is peeling or deteriorating. If wood comes up with paint you just scraped up stop. The true challenge to health and safety is presented when one needs to work on scrape sand and otherwise remediate lead-paint-covered surfaces.